PBXtech.info - View Single Post - AT-X Command

altriguy · July 30th, 2004, 03:02 PM

It did not work. Here is what I tried:

I downloaded V2.0 (the unit was V1.3). I installed the Admin suite. I then moved the ip403.bin file from the IP403V1_99 directory to the Manager directory. I set my PC to 192.168.42.2. I then opened Manager and added the BootP entry: MAC: 000E07008720 / IP Address: 192.168.42.1 (I tried 42.6 also) / File Name: ip403.bin

I verified that the working directory was set to C:\Program Files\ Avaya\IP Office\Manager. Also the Broadcast address is: 255.255.255.255.

I then power cycled the Control Unit and nothing happens. The TFTP log shows nothing and when I connect to the DTE Port, I only get:
P2 Loader 0.7 (4MB-2xLV160 Flash-120nS SDRAM-10)
CPU Revision 0x0502

July 30th, 2004, 03:02 PM	#8 (permalink)
altriguy Join Date: Jul 2004 Posts: 7	Re: AT-X Command It did not work. Here is what I tried: I downloaded V2.0 (the unit was V1.3). I installed the Admin suite. I then moved the ip403.bin file from the IP403V1_99 directory to the Manager directory. I set my PC to 192.168.42.2. I then opened Manager and added the BootP entry: MAC: 000E07008720 / IP Address: 192.168.42.1 (I tried 42.6 also) / File Name: ip403.bin I verified that the working directory was set to C:\Program Files\ Avaya\IP Office\Manager. Also the Broadcast address is: 255.255.255.255. I then power cycled the Control Unit and nothing happens. The TFTP log shows nothing and when I connect to the DTE Port, I only get: P2 Loader 0.7 (4MB-2xLV160 Flash-120nS SDRAM-10) CPU Revision 0x0502