PBXtech.info - View Single Post - AT-X Command

altriguy · July 29th, 2004, 11:39 PM

The TFTP Log shows the start time but nothing else. I have the log open when I power cycle the unit but I get nothing.

I did the DTE Maintenance because I wanted to blow out the config and start from the factory default.

I wrote down what the MAC address was before I blew out the config. Is there anyway to find out what commands I can use from the DTE Port. Can I set an IP Address from the DTE port so that I can get the Manager to communicate with it?

Any help would be greatly appreciated.

July 29th, 2004, 11:39 PM	#5 (permalink)
altriguy Join Date: Jul 2004 Posts: 7	Re: AT-X Command The TFTP Log shows the start time but nothing else. I have the log open when I power cycle the unit but I get nothing. I did the DTE Maintenance because I wanted to blow out the config and start from the factory default. I wrote down what the MAC address was before I blew out the config. Is there anyway to find out what commands I can use from the DTE Port. Can I set an IP Address from the DTE port so that I can get the Manager to communicate with it? Any help would be greatly appreciated.