PBXtech.info - View Single Post

jaiello2000 · July 15th, 2004, 11:41 PM

Thanks for the config. I will have the tech compare it. I think the problem is somehow based on the fact that there were seveal cards and cabinets with this box. There are no longer any additional cabinets and cards were removed. It seems there is phantom configuration that cannot be removed as the original parts must be in place before the config can be removed. There does not seem to be any other explination why the dchannel will not come up.

Thanks for the Cisco info. I am using SIP to an IP Centrex/Hosted PBX system. This side I have down and know well. I am relying on the Avaya tech/expert to get the Avaya PRI going before I befuddle him with configuration that does not make sense to a normal PBX :)

Still struggling...

Joe

July 15th, 2004, 11:41 PM	#12 (permalink)
jaiello2000 Join Date: Jul 2004 Posts: 8	Re: G3V6 TN464F PRI D Channel Problem Thanks for the config. I will have the tech compare it. I think the problem is somehow based on the fact that there were seveal cards and cabinets with this box. There are no longer any additional cabinets and cards were removed. It seems there is phantom configuration that cannot be removed as the original parts must be in place before the config can be removed. There does not seem to be any other explination why the dchannel will not come up. Thanks for the Cisco info. I am using SIP to an IP Centrex/Hosted PBX system. This side I have down and know well. I am relying on the Avaya tech/expert to get the Avaya PRI going before I befuddle him with configuration that does not make sense to a normal PBX :) Still struggling... Joe Last edited by jaiello2000; July 15th, 2004 at 11:45 PM.