PBXtech.info - View Single Post

jfarris88 · May 25th, 2004, 09:26 AM

We ordered two PRIs through Verizon to replace our Flexpath T1s and have Definity Prologix G3csiV6. with a TN464F card. Just want to make sure that incoming and outgoing ANI will be supported on our system.

Pardon the question - I am new to telcoms and a bit nervous.

We also have account codes set up through AT&T. In order to place a long distance call, a valid account code must be entered. I am not sure how this is set up on our side through the switch and would appreciate any information you could give me to check this and if it will be transferrable through the PRIs.

May 25th, 2004, 09:26 AM	#1 (permalink)
jfarris88 Join Date: May 2004 Posts: 3	PRI with Prologix G3csi v6 We ordered two PRIs through Verizon to replace our Flexpath T1s and have Definity Prologix G3csiV6. with a TN464F card. Just want to make sure that incoming and outgoing ANI will be supported on our system. Pardon the question - I am new to telcoms and a bit nervous. We also have account codes set up through AT&T. In order to place a long distance call, a valid account code must be entered. I am not sure how this is set up on our side through the switch and would appreciate any information you could give me to check this and if it will be transferrable through the PRIs.