PBXtech.info - View Single Post

konri · May 13th, 2004, 09:32 AM

Hi.
I have tn2501ap S1 vh1f3 R3
I have also Definity R009i.05.1.122.4. with duplication.

When I disconnect ICC and ICB cable and remove Dup-int (01a, 01b) processor (01b) toneclock (01b) and net/pkt (01b). [so it's working as a typical single pbx] - Everything is ok and val is working OK.

When i connect ICC and ICB cable and remove Dup-int (01a, 01b) processor (01b) toneclock (01b) and net/pkt (01b). [so it's working as a duplicated pbx] - Everything is ok exept Val - it's not working.
System doesn't see annoucement card. (on card is red led - on and green is flashing)

Heeeeelp :)

Konri

May 13th, 2004, 09:32 AM	#1 (permalink)
konri Join Date: Jan 2004 Posts: 11	Problem with VAL Annoucement Hi. I have tn2501ap S1 vh1f3 R3 I have also Definity R009i.05.1.122.4. with duplication. When I disconnect ICC and ICB cable and remove Dup-int (01a, 01b) processor (01b) toneclock (01b) and net/pkt (01b). [so it's working as a typical single pbx] - Everything is ok and val is working OK. When i connect ICC and ICB cable and remove Dup-int (01a, 01b) processor (01b) toneclock (01b) and net/pkt (01b). [so it's working as a duplicated pbx] - Everything is ok exept Val - it's not working. System doesn't see annoucement card. (on card is red led - on and green is flashing) Heeeeelp :) Konri __________________ --====-- AMICOS CITO NOLI PARARE, QUOS AUTEM PARAVERIS, NE REICIAS --====--