Quote:
|
Originally Posted by tschimpf
I have a system console I have lost the settings on, I cannot login to the system does anyone know the settings of the enter or return key. I can change the enter key to _cf_ _lf_ CRLF_ and the return key has a blank you type in. I can type in craft but I cannot get the password field up after hitting enter or return.
|
See if this helps:
If the enter key on the System Access Terminal does not enter changes to a form.
Description:
The proper terminal emulation type must be selected. Type newterm and enter the correct terminal type. The SAT is normally a 715 and a remote terminal using an emulation is normally a 4410.
The enter key on a 715 GBCS-2 terminal must be programmed. To do so:
Press Ctrl & F1 at the same time
Press TAB key until Keyboard folder tab is highlighted.
Press gray down arrow and stop on Key Remapping
Press Enter
Press Enter/Chg Host key (Far right on the keyboard)
Press Esc (top left of keyboard)
Type SB (capitals)
Press gray down arrow stopping on Save/Exit
Press Enter
Press Ctrl & F1