View Single Post
Old June 20th, 2003, 11:31 AM   #5 (permalink)
hawaiian
PBXtech GOLD 100+ posts
 
hawaiian's Avatar
 
Join Date: Apr 2003
Posts: 108
hawaiian is on a distinguished road
Post

3.17. Voice over IP over Frame Relay

In previous releases of IP Office software Voice over IP on Frame Relay was only supported when PPP encapsulation was used. IP Office 1.4 introduces further Frame Relay enhancements, which allows the support of Voice over IP on Frame Relay when using RFC1490 encapsulation. In order to provide QoS when using RFC1490 encapsulation, FRF12 fragmentation has been implemented with IP Office 1.4 software.

When using RFC1490 + FRF12 it should be noted that all parameters on the Service | PPP tab are ignored. In this instance the IPHC parameters are configured within the DLCI configuration form of the WAN Port tab. It is imperative that all IPHC values are matched at each end of the link.

Implementation of these additional standards will increase the support for QoS with a number of third party vendor networks, such as Cisco.

http://support.avaya.com/japple/css/....UsageUpdate()
__________________
PBXtech.com
hawaiian is offline   Reply With Quote