PBXtech.info - View Single Post

phones329 · June 30th, 2008, 03:21 PM

Hey all, I have a strange one. My Medpro board is only showing the "odd" channels. 1-3-5-7. It is an TN2302ap hv21 fw 117 (upgraded to 118). I have moved slots, changed adpt on the rear, even returned the board as defect, new board, same issue. I installed an older Medpro (TN2302ap hv3 fw77) in the same slot and I can see all 8 channels. I am at a loss. Any help is much appreciated.
I am running an s8400 CM 15x.00.0.825.4 w/ patch 00.0.825.4-15759.

On a side note, both the server and CM show no alarms, yet the s8400 blade has the alarm LED lit. ???

Thanks in advance.

June 30th, 2008, 03:21 PM	#1 (permalink)
phones329 PBXtech SILVER 25+ posts Join Date: Jul 2003 Posts: 59	Medpro issue Hey all, I have a strange one. My Medpro board is only showing the "odd" channels. 1-3-5-7. It is an TN2302ap hv21 fw 117 (upgraded to 118). I have moved slots, changed adpt on the rear, even returned the board as defect, new board, same issue. I installed an older Medpro (TN2302ap hv3 fw77) in the same slot and I can see all 8 channels. I am at a loss. Any help is much appreciated. I am running an s8400 CM 15x.00.0.825.4 w/ patch 00.0.825.4-15759. On a side note, both the server and CM show no alarms, yet the s8400 blade has the alarm LED lit. ??? Thanks in advance.