PBXtech.info - View Single Post - AT-DEBUG not working

bhileman · May 1st, 2008, 03:40 PM

Hello All,

I called a friend of mine who knows quite a bit about IP Office and he gave me some suggestions. I was still unable to get AT-DEBUG to work on that unit but he told me about a program called WireShark (free download) that will monitor your IP Ports and when I plugged it into the IP Office Unit I was able to see the Mac address and the IP address (192.168.42.10). I put the Mac Address and IP address into my Manager software and pointed to the correct bin file. I made sure my IP Address on my laptop was 192.168.42.12 and had the correct Default Gateway 192.168.42.10.

I rebooted my IP Office SOE and the DTE port started showing the TFTP transfer! After about 2 minutes of loading stuff it came up to ready and I was able to pull a config from the unit.

I am now ready to push the old unit's config down to the new unit (after I make sure all the addressing matches) and I'll play with sending and receiving calls.

Thanks for looking at this post and sorry for taking up everyone's time!

May 1st, 2008, 03:40 PM	#2 (permalink)
bhileman Join Date: May 2008 Posts: 2	Re: AT-DEBUG not working Hello All, I called a friend of mine who knows quite a bit about IP Office and he gave me some suggestions. I was still unable to get AT-DEBUG to work on that unit but he told me about a program called WireShark (free download) that will monitor your IP Ports and when I plugged it into the IP Office Unit I was able to see the Mac address and the IP address (192.168.42.10). I put the Mac Address and IP address into my Manager software and pointed to the correct bin file. I made sure my IP Address on my laptop was 192.168.42.12 and had the correct Default Gateway 192.168.42.10. I rebooted my IP Office SOE and the DTE port started showing the TFTP transfer! After about 2 minutes of loading stuff it came up to ready and I was able to pull a config from the unit. I am now ready to push the old unit's config down to the new unit (after I make sure all the addressing matches) and I'll play with sending and receiving calls. Thanks for looking at this post and sorry for taking up everyone's time!