PBXtech.info - View Single Post

wellco · January 18th, 2008, 07:54 AM

Couple things....you will need to do into the dial plan and change the single digit "0" to and ext...then you can make it a vdn with no problem.

It's telling you about night service because one or both of the consoles were probably in the "'night" mode when unplugged...it happens all the time and is a pain...you will have to reconnect one of them to the old attendant ports and take them out of night service..then you will be able to remove them..
Give that a shot and see if that doesn't clear things up....
Good luck !!

January 18th, 2008, 07:54 AM	#3 (permalink)
wellco PBXtech SILVER 25+ posts Join Date: May 2005 Posts: 52	Re: Removing Attendant Console Couple things....you will need to do into the dial plan and change the single digit "0" to and ext...then you can make it a vdn with no problem. It's telling you about night service because one or both of the consoles were probably in the "'night" mode when unplugged...it happens all the time and is a pain...you will have to reconnect one of them to the old attendant ports and take them out of night service..then you will be able to remove them.. Give that a shot and see if that doesn't clear things up.... Good luck !!