|
Re: DS1 alarms
Find out what board the errors are logged against. If the errors are looged on the active error log, they are happening as you look. You can then test it. You can also look at the error log for resolved errors to get a history by doing a Display Errors command, change the Active to Errors, set the Interval to W=last 7 days or M=last 30 days, and enter in the board location ( ie 1a12 etc). Just because the span is up now does not mean it always has run error free. And a span can stay up even if it is taking Errored Seconds or Slips.
To see what DS1's or E1's are optioned you can run a list configuration ds1.
|