PBXtech.info - View Single Post

thomasq · December 13th, 2007, 08:33 AM

We are using Qsig IP trunks as tie/tandem between our S8720 servers. When a call is made that tandems across the IP trunk to the CM where our PRI's are connected for some reason when the call goes out the PRI the station ID is replaced with the BTN of the PRI. Does anyone know why this is happening? It only seems to happen to calls that go across the IP trunks. Any corrective steps for this? We have CPN activated on the station form and we also have send calling party number stroked on our PRI's.

I am at 3.1.2

December 13th, 2007, 08:33 AM	#1 (permalink)
thomasq Join Date: Jul 2003 Posts: 19	caller Id dropped across IP trunks We are using Qsig IP trunks as tie/tandem between our S8720 servers. When a call is made that tandems across the IP trunk to the CM where our PRI's are connected for some reason when the call goes out the PRI the station ID is replaced with the BTN of the PRI. Does anyone know why this is happening? It only seems to happen to calls that go across the IP trunks. Any corrective steps for this? We have CPN activated on the station form and we also have send calling party number stroked on our PRI's. I am at 3.1.2 __________________ Q Last edited by thomasq; December 13th, 2007 at 12:25 PM. Reason: Left off version