PBXtech.info - View Single Post

fataldata · December 6th, 2007, 02:21 PM

MedPro's and CLAN's can be checked via "get ethernet UUCSS"

IPSI's I believe can only be checked via their CLI interface. One way to check them from your desk is to telnet your server, then
Use the 'ipsisession -c UUC' command to enable telnet to the interface then telnet it and check. Then telnet the IPSI, do ipsilogin and enter your credentials.
Now I will say that I have no idea how to use the password presented by the 'ipsisession' command. I've tried it with my login name and root with no success. I have never been able to make it work and am thankful for the superuser credentials I discovered through interactions with other techs.
In the CLI type 'show port 1' to see how the ipsi is set up for duplex and speed.

December 6th, 2007, 02:21 PM	#3 (permalink)
fataldata PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 315	Re: IPSI, MEDPRO and CLAN MedPro's and CLAN's can be checked via "get ethernet UUCSS" IPSI's I believe can only be checked via their CLI interface. One way to check them from your desk is to telnet your server, then Use the 'ipsisession -c UUC' command to enable telnet to the interface then telnet it and check. Then telnet the IPSI, do ipsilogin and enter your credentials. Now I will say that I have no idea how to use the password presented by the 'ipsisession' command. I've tried it with my login name and root with no success. I have never been able to make it work and am thankful for the superuser credentials I discovered through interactions with other techs. In the CLI type 'show port 1' to see how the ipsi is set up for duplex and speed. __________________ Systems In Use: S8700 CM3.0 and S8710 CM3.1.1