PBXtech.info - View Single Post

phone guy · September 22nd, 2007, 10:02 PM

Food for thought, just in case you haven't looked.

From ASA log into the main server and verify survivable processor and media gateway.
list survivable- verify translations were downloaded and that it has registered.
list media - verify that it has registered.

Access web interface of 8300 via web browser. If your login and pw works here it should work from ASA. That's been my experience. I'm running 3.1.2.

Security/Server Access- are you enabled to access this via SAT.

Security/License File- verify all looks correct their.

If still no good....telnet to the media gateway and from the command prompt open a session to the icc. Type: session icc This is the 8300.

You'll be promted for your login/ pw see if you credentials work this way. If it works here you can type dsat at the command prompt

Not sure if any of these are the solution to the fix but it may provide you a go around.

September 22nd, 2007, 10:02 PM	#2 (permalink)
phone guy Join Date: Sep 2007 Posts: 15	Re: LSP login problem Food for thought, just in case you haven't looked. From ASA log into the main server and verify survivable processor and media gateway. list survivable- verify translations were downloaded and that it has registered. list media - verify that it has registered. Access web interface of 8300 via web browser. If your login and pw works here it should work from ASA. That's been my experience. I'm running 3.1.2. Security/Server Access- are you enabled to access this via SAT. Security/License File- verify all looks correct their. If still no good....telnet to the media gateway and from the command prompt open a session to the icc. Type: session icc This is the 8300. You'll be promted for your login/ pw see if you credentials work this way. If it works here you can type dsat at the command prompt Not sure if any of these are the solution to the fix but it may provide you a go around. Last edited by ahays; October 8th, 2007 at 10:55 AM.