PBXtech.info - View Single Post

uzumaki · August 21st, 2007, 10:00 PM

Yup, when i tried getting the existing 1A05 card (which is 24 port analog) then put it on 1C01 it did alarm after a few miniutes. And when i put it back on the original slot which is 1A05, the alarm is still there.

Also, the new boards that alarmed, did you try them in a slot that already has a TN2793 in it? ---- Yes I did. Still the same.

If you can observe, almost all cabinets A and B, already filled up with a 24 port analog, and the remaining cabinet C only hav 16 port. I have asked our pre-sales to reconfigure the clients PBX and the results on the avaya configurator requires a call classfier on cabinet C, in which the current setup doesn't have.

Ok i'll be checking the bents pins.

August 21st, 2007, 10:00 PM	#5 (permalink)
uzumaki Join Date: Aug 2007 Posts: 5	Re: Limitations of Definity Prologix Yup, when i tried getting the existing 1A05 card (which is 24 port analog) then put it on 1C01 it did alarm after a few miniutes. And when i put it back on the original slot which is 1A05, the alarm is still there. Also, the new boards that alarmed, did you try them in a slot that already has a TN2793 in it? ---- Yes I did. Still the same. If you can observe, almost all cabinets A and B, already filled up with a 24 port analog, and the remaining cabinet C only hav 16 port. I have asked our pre-sales to reconfigure the clients PBX and the results on the avaya configurator requires a call classfier on cabinet C, in which the current setup doesn't have. Ok i'll be checking the bents pins.