PBXtech.info - View Single Post

martinyoung · August 21st, 2007, 03:08 PM

Now we have something to work with.

I would start at the DS1 page and assign it as a lineside DS1 using B8ZS/ESF and protocol version a (NI1). Everything else at default. Have the Definity tech show you or tell you what they have.

If I wanted the PBX to pass calls directly to you instead of a trunk group, I would make it a hunt group. The lead number of the hunt group would be a DID that is either a normal incoming DID or a DNIS for an 800 number. The DNIS would be just a DID with only those digits whatever they are (three or four). The members of the hunt group would be stations with the type of DS1FD. The ANI of the incoming call should pass directly to you with no further manipulation needed.

August 21st, 2007, 03:08 PM	#10 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,435	Re: TN767E default settings to emulate T1 Now we have something to work with. I would start at the DS1 page and assign it as a lineside DS1 using B8ZS/ESF and protocol version a (NI1). Everything else at default. Have the Definity tech show you or tell you what they have. If I wanted the PBX to pass calls directly to you instead of a trunk group, I would make it a hunt group. The lead number of the hunt group would be a DID that is either a normal incoming DID or a DNIS for an 800 number. The DNIS would be just a DID with only those digits whatever they are (three or four). The members of the hunt group would be stations with the type of DS1FD. The ANI of the incoming call should pass directly to you with no further manipulation needed. __________________ Marty Retired Avaya DSIC tech