PBXtech.info - View Single Post

martinyoung · August 21st, 2007, 01:42 PM

If it works on the Brooktrout then it probably has a rollover cable. But if it is old then the DS1 configuration could be D4/AMI. The TN767E is very configurable despite what you are being told.

Your questionaire is a little confusing. Is this going to be directly connected to a Definity onsite or are you going to be running through a Telco Central Office before you connect to the Definity? A Definity is not a telco and most of your questions do not apply to a Definity. A Definity is usually the interface between the telco and whatever computer the Dialogic board sits in and handles all the processing you are asking about.

August 21st, 2007, 01:42 PM	#6 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,435	Re: TN767E default settings to emulate T1 If it works on the Brooktrout then it probably has a rollover cable. But if it is old then the DS1 configuration could be D4/AMI. The TN767E is very configurable despite what you are being told. Your questionaire is a little confusing. Is this going to be directly connected to a Definity onsite or are you going to be running through a Telco Central Office before you connect to the Definity? A Definity is not a telco and most of your questions do not apply to a Definity. A Definity is usually the interface between the telco and whatever computer the Dialogic board sits in and handles all the processing you are asking about. __________________ Marty Retired Avaya DSIC tech