PBXtech.info - View Single Post

techma · August 7th, 2007, 02:43 PM

I am building an Intuity MAP 100P and I am wondering if the RAID controller needs to have a terminator on the ouside connection. The drives are not lighting up the LED except when active and it comes up when booting that they are not responding. I have made them online and flashed the system. I have used 2 different machines and bios configs have been checked. I do get an error that says SCSI BIOS not installed. I haven't done this in a while but I may have narrowed it down to that termination but I'm not sure if does require it on the RAID controller board. It is not the SCSI terminator board that has the terminator adapter on it. Does anyone know?

August 7th, 2007, 02:43 PM	#1 (permalink)
techma PBXtech SILVER 25+ posts Join Date: Jul 2007 Posts: 88	Map100p R5 I am building an Intuity MAP 100P and I am wondering if the RAID controller needs to have a terminator on the ouside connection. The drives are not lighting up the LED except when active and it comes up when booting that they are not responding. I have made them online and flashed the system. I have used 2 different machines and bios configs have been checked. I do get an error that says SCSI BIOS not installed. I haven't done this in a while but I may have narrowed it down to that termination but I'm not sure if does require it on the RAID controller board. It is not the SCSI terminator board that has the terminator adapter on it. Does anyone know?