PBXtech.info - View Single Post - Unable to resolve a POWER alarm in an MCC

martinyoung · January 11th, 2007, 03:31 PM

Over the decades that I have been working with Definitys, and the 100s of machines that I have touched, I have never encountered a failure of the current limiter in service. They will fail if you put them in upside down and turn the PBX on but you will smell that immediately. I would put that possibility at the bottom of my list of possible causes.

January 11th, 2007, 03:31 PM	#6 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,435	Re: Unable to resolve a POWER alarm in an MCC Over the decades that I have been working with Definitys, and the 100s of machines that I have touched, I have never encountered a failure of the current limiter in service. They will fail if you put them in upside down and turn the PBX on but you will smell that immediately. I would put that possibility at the bottom of my list of possible causes. __________________ Marty Retired Avaya DSIC tech