PBXtech.info - View Single Post

PBX Admin · October 6th, 2006, 01:59 PM

The software release on the G3si is V9, and the G34 would be V11. Both ports are set right now to 10/half. I was told earlier by my counterpart that the backplane cabling can only support 10/half on the EPN. The EPN at location B is an SRP. Is it true though that the TN799C can only support 10/half?

October 6th, 2006, 01:59 PM	#3 (permalink)
PBX Admin Join Date: Sep 2006 Posts: 4	Re: IP Trunking Issue The software release on the G3si is V9, and the G34 would be V11. Both ports are set right now to 10/half. I was told earlier by my counterpart that the backplane cabling can only support 10/half on the EPN. The EPN at location B is an SRP. Is it true though that the TN799C can only support 10/half?