PBXtech.info - View Single Post

underdog · June 8th, 2006, 08:15 PM

Hello,

The forums have been great on helping me to get this setup. I just setup a tie trunk to the VoIP gateway I installed and all is working great but I have a problem setting up a route. If someone could help I’ll be glade to post the progress I did to get a Trixbox which was Asterisk@home with a Sangoma four port ISDN-Pri card on the forums with a step by step guide.

Definity G3si+m R4

I’m dialing out from the PC to the switch 8620 the 8410d rings I pick up and talk works great and also receive caller-id. My softphone number is lets say 4000 how do I pick up the 8410d and dial my softphone? Please step by step newbi on the routing.

Thanks,
Steve

June 8th, 2006, 08:15 PM	#1 (permalink)
underdog Join Date: May 2006 Posts: 17	Definity G3si R4 Pri Route Hello, The forums have been great on helping me to get this setup. I just setup a tie trunk to the VoIP gateway I installed and all is working great but I have a problem setting up a route. If someone could help I’ll be glade to post the progress I did to get a Trixbox which was Asterisk@home with a Sangoma four port ISDN-Pri card on the forums with a step by step guide. Definity G3si+m R4 I’m dialing out from the PC to the switch 8620 the 8410d rings I pick up and talk works great and also receive caller-id. My softphone number is lets say 4000 how do I pick up the 8410d and dial my softphone? Please step by step newbi on the routing. Thanks, Steve