PBXtech.info - View Single Post

Cephas · March 2nd, 2006, 08:35 AM

In other words, just put one NIC in the VM PC and connect it to your network the way you would any other server on your network. Likewise, plug the IPO into the network as if it were a server too.

In a small network, this means everything plugs into the same switch and is assigned to the same IP subnet.

Then, as mentioned, you can open port 3389 in your firewall and direct it to the VM PC, and you'll be able to remote administer your entire telecom setup. I do this all the time and it's by far the easiest way to handle remote admin, IMHO.

Peter

March 2nd, 2006, 08:35 AM	#3 (permalink)
Cephas Moderator Join Date: Sep 2003 Posts: 562	Re: remote access In other words, just put one NIC in the VM PC and connect it to your network the way you would any other server on your network. Likewise, plug the IPO into the network as if it were a server too. In a small network, this means everything plugs into the same switch and is assigned to the same IP subnet. Then, as mentioned, you can open port 3389 in your firewall and direct it to the VM PC, and you'll be able to remote administer your entire telecom setup. I do this all the time and it's by far the easiest way to handle remote admin, IMHO. Peter __________________ Need more indepth assistance from a top expert? Looking for Ultra Secure, Offsite Data Backup? www.morrack.com