PBXtech.info - View Single Post - adding a G650 via fiber to a center stage

martinyoung · February 27th, 2006, 07:14 PM

Since you are using single mode fiber, do you have single mode transceivers? 9823's will not work on SM fiber. Single mode transceivers also require external attenuators.

Also, does the switch release support G650s?

You will need a 2182 tone clock in that carrier. One IPSI will support five port networks, are you ok in that area?

If everything else is ok, this is how I would add it

1.Ch circuit and add the TN573 in the SNI (do not seat the card yet).
2.Add cabinet and show it as a G650.
3.Ch cir x and make sure there is a TN570 in it.
4.Run all the fiber cross connects and plug everything in except the TN573.
5.Add fiber next.
6.Now seat the TN573.

Do it in this sequence and you will rarely see any alarms unless something is physically wrong.

February 27th, 2006, 07:14 PM	#2 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,435	Re: adding a G650 via fiber to a center stage Since you are using single mode fiber, do you have single mode transceivers? 9823's will not work on SM fiber. Single mode transceivers also require external attenuators. Also, does the switch release support G650s? You will need a 2182 tone clock in that carrier. One IPSI will support five port networks, are you ok in that area? If everything else is ok, this is how I would add it 1.Ch circuit and add the TN573 in the SNI (do not seat the card yet). 2.Add cabinet and show it as a G650. 3.Ch cir x and make sure there is a TN570 in it. 4.Run all the fiber cross connects and plug everything in except the TN573. 5.Add fiber next. 6.Now seat the TN573. Do it in this sequence and you will rarely see any alarms unless something is physically wrong. __________________ Marty Retired Avaya DSIC tech