PBXtech.info - View Single Post - Not able to register BCM 50 with the Sig Server

David · February 24th, 2006, 12:38 PM

We have been able to finally get the SRG50 to register with the Signaling Server but after about a minute the SRG50 becomes de-registered from the Signaling Server.
It goes back to "attempting to discover gatekeeper at. " So we still can't register really.

Also we are trying to configure the SRG50 to perform external paging through Active physical port 62.
Active physical port 62 is assigned to line pool B.
Line pool B is set up with an access code of 0080, so that if you dial that access code you should get routed out of Active physical port 62 the only port in that group. But It doesn't seem to work just yet.

February 24th, 2006, 12:38 PM	#3 (permalink)
David PBXtech SILVER 25+ posts Join Date: Apr 2005 Posts: 29	Re: Not able to register BCM 50 with the Sig Server We have been able to finally get the SRG50 to register with the Signaling Server but after about a minute the SRG50 becomes de-registered from the Signaling Server. It goes back to "attempting to discover gatekeeper at. " So we still can't register really. Also we are trying to configure the SRG50 to perform external paging through Active physical port 62. Active physical port 62 is assigned to line pool B. Line pool B is set up with an access code of 0080, so that if you dial that access code you should get routed out of Active physical port 62 the only port in that group. But It doesn't seem to work just yet.