PBXtech.info - View Single Post - 3 ?s

martinyoung · February 1st, 2006, 10:24 AM

"1765 11 11 p93 locl" is wrong. 1 plus area code is not a local call, change to fnpa.

"4 7 7 p92 hnpa" is ok. That is just telling you that a seven digit call starting with 4 is a local call and it can be hnpa or locl.

You will get the "no records match" error if there is not an entry in the ARS tables to match your request. Unless you have 17657 or 423 in the ARS tables, this is the correct response.

I suspect you are getting the route-chosen error message because your partition route table does not have a route in the PGN 1 location.

I still recommend replacing the pxx with the specific route pattern you want the call to use.

February 1st, 2006, 10:24 AM	#15 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,435	Re: 3 ?s - cmd to check usage of trunk group? "1765 11 11 p93 locl" is wrong. 1 plus area code is not a local call, change to fnpa. "4 7 7 p92 hnpa" is ok. That is just telling you that a seven digit call starting with 4 is a local call and it can be hnpa or locl. You will get the "no records match" error if there is not an entry in the ARS tables to match your request. Unless you have 17657 or 423 in the ARS tables, this is the correct response. I suspect you are getting the route-chosen error message because your partition route table does not have a route in the PGN 1 location. I still recommend replacing the pxx with the specific route pattern you want the call to use. __________________ Marty Retired Avaya DSIC tech