PBXtech.info - View Single Post - 3 ?s

rhwimmers · January 31st, 2006, 06:51 AM

ok so when I do a list partition-route-table and go down to 91 (which is p91 on the ARS screen) I see that under PGN7 it just says 91 (route pattern 91) but under PGN 8 has 991(route pattern 991). What assigns a station to the PGN number - what im thinking is if they are PGN 7 it will use 97 and if they are PGN 8 it will use 997 - which looks correct, but I believe the problem is they are set for the wrong PGN.

January 31st, 2006, 06:51 AM	#5 (permalink)
rhwimmers PBXtech GOLD 100+ posts Join Date: Dec 2005 Posts: 102	Re: 3 ?s - cmd to check usage of trunk group? ok so when I do a list partition-route-table and go down to 91 (which is p91 on the ARS screen) I see that under PGN7 it just says 91 (route pattern 91) but under PGN 8 has 991(route pattern 991). What assigns a station to the PGN number - what im thinking is if they are PGN 7 it will use 97 and if they are PGN 8 it will use 997 - which looks correct, but I believe the problem is they are set for the wrong PGN.