PBXtech.info - View Single Post

desrae · January 21st, 2006, 02:02 PM

I have an Avaya Definity G3R, V11 (MultiVantage 1.2 ). I have seven MCC in three locations, six connecting back to the first via multi-mode fiber. All locations are within a 1/2 mile square area (campus).

The problem: I have a 200 pair cable to a residence hall that is going bad fast. I have three options I can think of: repair the splice cases, replace the cable, or add another cabinet (the fiber to this location is fine). I am researching the viability of each solution. I'm posting here to get some feedback on option three.

I am thinking I could install a SCC1 at the residence hall. Minimally, it looks like I'd need expansion interface, a switch node interface in main cabinet, tone clock, tone detector, power supply, analog circuit packs and appropriate cables. Just wondering if someone could tell me if I'm on the right track, orat least point me in the right direction if I'm off-track.

TIA for the assistance.

January 21st, 2006, 02:02 PM	#1 (permalink)
desrae PBXtech SILVER 25+ posts Join Date: Oct 2004 Posts: 30	Remote Cabinet I have an Avaya Definity G3R, V11 (MultiVantage 1.2 ). I have seven MCC in three locations, six connecting back to the first via multi-mode fiber. All locations are within a 1/2 mile square area (campus). The problem: I have a 200 pair cable to a residence hall that is going bad fast. I have three options I can think of: repair the splice cases, replace the cable, or add another cabinet (the fiber to this location is fine). I am researching the viability of each solution. I'm posting here to get some feedback on option three. I am thinking I could install a SCC1 at the residence hall. Minimally, it looks like I'd need expansion interface, a switch node interface in main cabinet, tone clock, tone detector, power supply, analog circuit packs and appropriate cables. Just wondering if someone could tell me if I'm on the right track, orat least point me in the right direction if I'm off-track. TIA for the assistance.