nstephens8

I have configured TN556 for ISDN-BRI to a Polycom FX.

You will need to port 2 data modules to each port.
I assume you will use at least 3 BRI lines.
So you would need to create 6 data-modules ported to 3 ports on the TN556

So you create 2 data modules (ie: 4380 & 4381)

display data-module 4380 Page 1 of 2 SPE B
DATA MODULE

Data Extension: 4380 Name: Polycom1
Type: wcbri COS: 1
Port: 01A0401 COR: 30 Multimedia? n
TN: 1


ABBREVIATED DIALING
List1:

SPECIAL DIALING OPTION:



CIRCUIT SWITCHED DATA ATTRIBUTES
Default Duplex: full Default Mode: async Default Speed: 1200

DATA MODULE CAPABILITIES
Default ITC: restricted Default Data Application: M2_A

display data-module 4380 Page 2 of 2 SPE B
DATA MODULE


BRI LINK/MAINTENANCE PARAMETERS

XID? n Fixed TEI? n
Country Protocol: 1 Endpt Init? y SPID: xxx4380 Endpt ID: 01


display data-module 4381 Page 1 of 2 SPE B
DATA MODULE

Data Extension: 4381 Name: Polycom2
Type: wcbri COS: 1
Port: 01A0401 COR: 30 Multimedia? n
TN: 1


ABBREVIATED DIALING
List1:

SPECIAL DIALING OPTION:



CIRCUIT SWITCHED DATA ATTRIBUTES
Default Duplex: full Default Mode: async Default Speed: 1200

DATA MODULE CAPABILITIES
Default ITC: restricted Default Data Application: M2_A

display data-module 4381 Page 2 of 2 SPE B
DATA MODULE


BRI LINK/MAINTENANCE PARAMETERS

XID? n Fixed TEI? n
Country Protocol: 1 Endpt Init? y SPID: xxx4381 Endpt ID: 02