PBXtech.info - View Single Post

stubborne · December 19th, 2005, 08:43 AM

Rod - check the ip-interface configs for the CLAN (and MEDPRO) you are using for this trunk group. Ensure that the gateway/subnet mask settings are correct. Then ensure that the gw you are using has the proper routing configurations to get to your far end.

You can do some ping tests:
ping ip-address ['board' board location], ['source' virtual endpoint],
['packet-length' (64-1500)], ['repeat' (1-100)]
where IP address is (0-255).(0-255).(0-255).(0-255)

December 19th, 2005, 08:43 AM	#2 (permalink)
stubborne PBXtech PLATINUM 300+ posts Join Date: Jul 2003 Posts: 401	Re: SBS Signaling Rod - check the ip-interface configs for the CLAN (and MEDPRO) you are using for this trunk group. Ensure that the gateway/subnet mask settings are correct. Then ensure that the gw you are using has the proper routing configurations to get to your far end. You can do some ping tests: ping ip-address ['board' board location], ['source' virtual endpoint], ['packet-length' (64-1500)], ['repeat' (1-100)] where IP address is (0-255).(0-255).(0-255).(0-255) __________________ Stu