PBXtech.info - View Single Post

Colin · December 18th, 2005, 03:39 PM

In order to add or remove an extn number from a group hunt list you need to know the list number (LSNO)and the store entry number (STOR within the list. You will need to use this procedure if you get a SCH8825 message when changing a TN.
You can get this information by printing the Group Hunt Lists in overlay LD 20.
REQ PRT
TYPE GHT
LSNO (c/r for all the lists or enter the list no)
Check the print out to obtain the correct information.

The changes are made in LD 18.

REQ CHG
TYPE GHT
LSNO (enter the list number which requires changing this is the GHLN from the above print out)
SIZE (c/r)
WRT (c/r)
STOR enter the store number concerned then space then the extentsion (DN) number
STOR XX YYYY for example
WRT (c/r) Yes to update the list.
To remove an entry at the STOR prompt
STOR enter the store number, space(c/r)
STOR XX space bar
WRT (c/r)
Carriage return through to the REQ prompt

The information below will assist with the removal of a PLDN (Pilot DN), please be careful at the ALL command and enter no as directed:

LD 57

REQ out
TYPE ffc
CUST 0
ALL no
CODE pldn
PLDN (enter the number you wish to remove)
PLDN (use the enter key until the REQ prompt appears)

December 18th, 2005, 03:39 PM	#3 (permalink)
Colin PBXtech SILVER 25+ posts Join Date: Feb 2004 Posts: 86	Re: Remove an extension from a group. In order to add or remove an extn number from a group hunt list you need to know the list number (LSNO)and the store entry number (STOR within the list. You will need to use this procedure if you get a SCH8825 message when changing a TN. You can get this information by printing the Group Hunt Lists in overlay LD 20. REQ PRT TYPE GHT LSNO (c/r for all the lists or enter the list no) Check the print out to obtain the correct information. The changes are made in LD 18. REQ CHG TYPE GHT LSNO (enter the list number which requires changing this is the GHLN from the above print out) SIZE (c/r) WRT (c/r) STOR enter the store number concerned then space then the extentsion (DN) number STOR XX YYYY for example WRT (c/r) Yes to update the list. To remove an entry at the STOR prompt STOR enter the store number, space(c/r) STOR XX space bar WRT (c/r) Carriage return through to the REQ prompt The information below will assist with the removal of a PLDN (Pilot DN), please be careful at the ALL command and enter no as directed: LD 57 REQ out TYPE ffc CUST 0 ALL no CODE pldn PLDN (enter the number you wish to remove) PLDN (use the enter key until the REQ prompt appears)