PBXtech.info - View Single Post - Where/what PBX code to turn on message light?

martinyoung · December 8th, 2005, 04:11 PM

To use LWC to turn the MWI on and off the "LWC Reception" field (first line, second page) needs to be set for "spe". You can always turn the light on regardless of what the field says, but you cannot turn it off unless it says "spe". You will also not be able to turn it off if you turned it on while the field was set to "audix".

To turn the light off, no matter what turned it on, there is a command "cl amw all <sta #>". This will turn off the MWI.

Try your voice mail with the above option. LWC on/off codes and reception set to spe. Let us know if it works.

December 8th, 2005, 04:11 PM	#8 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,445	Re: Where/what PBX code to turn on message light? To use LWC to turn the MWI on and off the "LWC Reception" field (first line, second page) needs to be set for "spe". You can always turn the light on regardless of what the field says, but you cannot turn it off unless it says "spe". You will also not be able to turn it off if you turned it on while the field was set to "audix". To turn the light off, no matter what turned it on, there is a command "cl amw all <sta #>". This will turn off the MWI. Try your voice mail with the above option. LWC on/off codes and reception set to spe. Let us know if it works. __________________ Marty Retired Avaya DSIC tech