PBXtech.info - View Single Post - Where/what PBX code to turn on message light?

axmirza1 · December 7th, 2005, 12:45 PM

AL: I tried using LWC but it keeps giving me wave off tone. I have the feature code programmed as *4 to activate & #4 to de-activate and on the station side “LWC activation” is set to “Y”. What am I missing? Plus isn’t LWC deactivate must be performed from the same station?

Marty: PBX below v9 do not have “Mode Interface” feature. On one of my G3iv9 I was able to change “mode code interface” to “Y”. But when I do “cha sys mod” command, it gives me an invalided command. Any other solution?

December 7th, 2005, 12:45 PM	#4 (permalink)
axmirza1 Join Date: Dec 2005 Posts: 16	Re: Where/what PBX code to turn on message light? AL: I tried using LWC but it keeps giving me wave off tone. I have the feature code programmed as 4 to activate & #4 to de-activate and on the station side “LWC activation” is set to “Y”. What am I missing? Plus isn’t LWC deactivate must be performed from the same station? Marty:* PBX below v9 do not have “Mode Interface” feature. On one of my G3iv9 I was able to change “mode code interface” to “Y”. But when I do “cha sys mod” command, it gives me an invalided command. Any other solution?