PBXtech.info - View Single Post - Where/what PBX code to turn on message light?

martinyoung · December 7th, 2005, 10:58 AM

Mode code is the generic interface that Avaya provides and is used by equipment that cannot use the higher and more efficient protocols. It sounds like this what you need.

If you need to use mode code, first go to your "ch sys fea" and look for the entry that says "Mode Code Interface" and change that to "y".

Then go to "ch sys mode" and enter the codes you want to use for that feature. You will also have to tell your voice mail the same codes.

December 7th, 2005, 10:58 AM	#3 (permalink)
martinyoung Moderator Join Date: Dec 2005 Posts: 1,445	Re: Where/what PBX code to turn on message light? Mode code is the generic interface that Avaya provides and is used by equipment that cannot use the higher and more efficient protocols. It sounds like this what you need. If you need to use mode code, first go to your "ch sys fea" and look for the entry that says "Mode Code Interface" and change that to "y". Then go to "ch sys mode" and enter the codes you want to use for that feature. You will also have to tell your voice mail the same codes. __________________ Marty Retired Avaya DSIC tech